Description
The Vision Plus VP3 Digital Amplifier is designed to enhance the performance of all non-amplified directional TV antennas. There is also a non-amplified outlet for FM Radio reception when used in conjunction with a UHF/FM antenna.This powerful amplifier with high gain and low noise capabilities will ensure improved performance especially in poor reception areas.
Specification:
*On/Off switch
*Variable gain control
*3 TV outputs
*1 FM Radio output
*Frequency Range UHF 470-862 MHz
*Frequency Range VHF 40-230 MHz
*Frequency Range FM 88-108 MHz
*Amplifier Gain Max 15dB
*Gain Adjustment 0 to ≃ 15 dB
*Flatness +1.5dB
*Noise Figure 2.2dB
*Output Impedance 75ohms
*Signal Handling 80 dBμV
*Power Supply 10.8-28v DC
*Power Consumption 55 mA
*Dimensions 157wx46hx28d (mm)
The amplifier requires a 12-24 volt power supply from a fused auxiliary outlet fed from the battery. If wiring direct to a battery we recommend an in line fuse (max 5A) on the positive wire. If unsure please consult with a qualified installer.
